Conference
Papers
- R. Ciocan, N. Ida and E. Ciocan, "Three Dimensional Transmission
Line Matrix Model for Ultrasonic Imaging," Proceedings of the SPIE -
The International society for optical engineering, Vol. 5047, Smart
Nondestructive Evaluation and Health Monitoring of Structural and
Biological Systems II, Tribikram Kundu, ed., 2003, pp. 180-190.
- R. Ciocan and N. Ida, "Application of Transmission Line Matrix
Method to Antenna Synthesis," Proceedings of the 2003 IEEE AP-S
International Symposium on Antennas and Propagation and USNC/CNC/URSI
North American Radio Science Meeting, Columbus, Ohio, USA, June 22-27,
2003, Vol. III, pp. 768-771
- S. Barmada, L. Di Rienzo, N. Ida and S. Yuferev, "The use of
surface impedance boundary conditions in time domain problems:
Numerical and experimental validation," Proceedings of the 19th Annual
Review of Progress in Applied Computational Electromagnetics, (ACES
2003), pp. 397-402.
- R. Ciocan and N. Ida, "Transmission line matrix model for
microwave scanning microscopy," Proceedings of the 19th Annual Review
of Progress in Applied Computational Electromagnetics, (ACES 2003), pp.
802-808.
- N. Ida and R. Ciocan, "Some applications of the TLM methods to
nondestrcutive testing," (invited paper) in the 2002 proceedings of the
CBMag Conference, Gramado, Brazil, Oct. 4-7, 2002, paper No. 3
(published on CDRom, 9 pages).
- R. Ciocan, N. Ida and D. Discoll, "A Transmission Line
Matrix Model for Ultrasound Imaging," Proc. SPIE Vol. 4702 , Smart
Nondestructive Evaluation for Health Monitoring of Structural and
Biological Systems, pp. 202-211, 2002. (Conference, San Diego,
March 17-21, 2002).
- N. Ida and R. Ciocan "Method and system for Air-driven pump
monitoring based on frequency analysis of the acoustic signal," Proc.
SPIE Vol. 4694 , Smart Sensor Technology and Measurement Systems , pp.
86-93, 2002
- R. Ciocan and N. Ida, "A transmission line matrix model for
microwave NDT ," ASNT Spring Conference and 11th Annual Research
Symposium ," Portland Oregon March 2002, pp86.
- N. Ida and E.J. Silva, "Parameter selection for anisotropic PML
with ABC in the finite element method," in the Proceedings of 8th
International Conference on Optimization of Electrical and Electronic
Equipment (OPTIM-2002), Brasov, Romania, May 16-17, 2002, pp. 13-16.
- N. Ida and S.
Yuferev, "Surface Impedance Boundary Conditions for Low Field
Penetration Applications," in Procedings of the 6th International
Conference on Engineering of Modern Electric Systems (SMES), Oradea,
Romania, May 2001, pp. 110-117.
- S. Barmada, N. Ida and M. Raugi, “Solution
of Electromagnetic Transients by Wavelet Expansion in the Time Domain,”
Proceedingsof the2001 IEEE Antennas and Propagation Society
International
Symposium, Boston,MA, July 9-13, 2001, pp. 825-829.
- E. J. Silva and N. Ida, "On the use of PML
and
ABC to Truncate Unbounded Domains in the Finite Element Method," in
Proceedings
of the 7th International Conference on Optimization of Electrical and
Electronic
Equipment (OPTIM’2000), 2000, pp. 26-30.
- L. Proekt, S. Yuferev and N. Ida,
“Calculation
of the surface impedance near an imperfectly conducting edge,” in
Proceedings
of the Fifth International Conference o Mathematical and Numerical
Aspects
ofWave Propagation, 2000, pp. 241-245.
- N. Ida and S. Yuferev, “A generalized
Surface
Impedance Concept,”(Invited), Proceedings of the 9th
InternationalIGTESymposium
on Numerical Field Calculation in Electrical Engineering
andEuropeanTEAMWorkshop,
Sept. 2000 pp. 181-186.
- N. Ida, "The Remote Field Effect: Models
andInterpretations,"in
Nondestructive Characterization of Materials IX, Sydney,Australia,
1999,Robert
E. Green, Ed., AIP Conference Proceedings 497, pp.95-100.
- M. Xu and N. Ida, "Solving Electromagnetic
Inverse
Problems by Artificaial Intelligence Methods", in Proceedings of the
Third
Brazilian Electromagnetics Conference (Anais do III Congresso
Brazileirode
Eletromagnetismo), Sao Paulo, October 25-28, pp. 206-209, Nov. 1998.
- Z. Ren and N. Ida, "Computation of
Magnetostatic
Field using Second Order Edge Eelements in 3D," Proceedings of the 6th
International
IGTE Symposium on Numerical Field Calculation in Electrical
Engineering,21-23
September 1998, Graz, Austria, pp. 248-252.
- Z. Ren, N. Ida and A. Razek, "Some
BenefitsofDifferential
Forms in Electromagnetic Field and Force Calculation," inProceedingsof
the
4th International Workshopon Electric and Magnetic
Fields:FromNumericalMethods
to Industrial Applications, Marseille, France, May 12-15,pp.307-312,May
1998.
- N. Ida, (keynote address) "Numerical models
for
electromagnetic nondestructivetesting of materials," in Proceedings of
CORENDE
(Congreso Regional de Ensayosno Destructivos y Estructurales), October
27
to 30, 1997, Mendoza, Argentina,pp. 1-9.
- G. Adamovsky and N. Ida, “Laser Beam
Propagation
Through InhomogeneousMedia,” Proceedings of the SPIE Conference
on Optical
Technology in Fluid, Thermal, and Combustion flows III, San Diego,27
July-
1 August,1997, pp.530-539.
- S. Yuferev and N. Ida, “Impedance
Boundary
Conditions of HighOrder Approximation for Electromagnetic Transient
Scattering
Problems,” Proceedings of the 10th International Conference on
Antennas
and Propagation, Edinburgh, April 12-17, 1997), IEE Publication No.
426,
pp.
1,306-1,309, 1997.
- J.P.A. Bastos, N. Ida, R.C. Mesquita and J.
Gomes,"Use
of reduced 3Dedge elements for 2D vector potential problems," Record of
the
9th COMPUMAGConference on the Computation of Electromagnetic Fields,
October,
1993, pp.336-337.
- J.P.A. Bastos, N. Ida and J. Gomes,"
Modeling
of 2D TE waveguides usingreduced 3D hexahedral edge elements, Record of
the
9th COMPUMAG Conferenceon the Computation of Electromagnetic Fields,
October,
1993, pp. 338-339.
- A.J. Sharafuddin, N. Ida and J. Grover,
"Object
oriented design andmatrix computation," Record of the 9th COMPUMAG
Conference
onthe Computationof Electromagnetic Fields, October, 1993, pp. 234-235.
- J.P.A. Bastos, N. Sadowski and N. Ida, “A
new 2D formulation for magnetostaticsusing H as variable,” Proceedings
of the ISTET ‘97 Conference,Palermo, Italy, June 9-11, 1997, pp.
236-239.
- Q.K. Zhang, N. Ida, Y.R. Qiu and Z.R.
Jiang,"A
new permanent magnetsynchronous motor design configuration and
finiteelement
analysis," Proceedingsof the 12th Annual Review of Progress in
AppliedComputational
Electromagnetics,Vol. II, 1996, pp. 1196-1201.
- N. Ida and J.S. Wang, "Models for microwave
nondestructive
testing of materials,"Proceedings of the Seventh International
Symposiumon
NondestructiveCharacterizationof Materials, Prague, Czech Republic,
June19-22,
1995, A.L.Bartos, R.E. Greenand C.O. Ruud, Transtec
Publications,Zurich,Switzerland,
pp. 93-100.
- N. Ida, “Testing and monitoring with
microwave
resonant structures:applications and models,” Proceedings of the 14th
World Conference onNon-Destructive Testing, New Delhi, 8-13 December
1996,
Ashgate PublishingCompany, Vol. 1, pages 259 - 264.
- S.Yuferev and N.Ida "Application of
approximate
boundary conditionsto electromagnetic transient scattering problems",
Proceedings
of the 3rd InternationalConference on Computations in Electromagnetics
(CEM),
10-12 April 1996, BathUK, publ by IEE, 1996, Conf. Publ. Number 420,
pp.51-56.
(QC759.6 .I56 1996).
- K.C. Chellamuthu and N. Ida, (Invited)
"Adaptive
finite element meshrefinement and 'a posteriori' error estimation
estimation
procedures for electromagnetic fieldcomputation," Proceedings of
CBmag'95
- Brazilian Conference on Electromagnetics, May1995, pp. 25-30.
- K.C. Chellamuthu and N. Ida, "An a
posteriori
local error estimationscheme for adaptive computation of
electromagneticfields
using edge finiteelements," in Advanced Computational and Design
Techniques
in Applied ElectromagneticSystems, S.Y. Hahn, ed., Elsevier, 1995, pp.
587-590.
- J.P. Gomes and N. Ida, "3D analysis of
waveguide
loaded cavities usingedge based finite elements," in Advanced
Computational
and Design Techniquesin Applied Electromagnetic Systems, S.Y. Hahn,
ed.,Elsevier,
1995, pp. 559-562.
- K.C. Chellamuthu and N. Ida, "Parallel
processing
in adaptive finiteelement computation of electromagnetic field
problems,"
In Proceedings ofthe International conference on Robotics, Vision and
Parallel
Processing for IndustrialAutomation, ROVPIA-94, Ipoh, Malaysia, May
1994,
pp. 519-527.
- J.P. Gomes N. Ida, and J.S. Wang, "Some
Computational
Techniques forModeling of Testing Parameters in Microwave Cavity
Resonators,"
Proceedingsof the SPIE Conference, 25-26 July, 1994, San Diego, CA.,
Volume
2275, S.S.Udpa and H.C. Han eds., pp. 72-78.
- N. Ida and J.S. Wang, "Vector boundary
element/finite
element method for electromagnetic scattering," Simulation and Design
ofAppliedElectromagnetic
Systems, T. Honma, Ed. Elsevier Science B.V., 1994,pp. 41-44.
- N. Ida, "Microwave Nondestructive
Evaluationof
Materials: a Review,"in Review of Progress in Nondestructive
Evaluation,Vol.
15a, D.O. Thompsonand D.E. Chimenti, Plenum Press, New York, 1994,
pp.591-598.
- N. Ida, Minyan Li, and L. Roemer, "Bayesian
Analysis
for Fault Location Based on Finite Element Models," in Maximum
Entropy
and
Bayesian Methods, A. Mohammad-Djafari and G. Demoments, (eds.), Kluwer
Academic
Publishers, Amsterdam, 1993, pp. 333-339.
- N. Ida, "Numerical models for
electromagnetic
nondestructive testing of materials, "(Invited paper), Proceedings of
Congresso
Brasiliero do Electromagnetismo Applicado, Belo Horizonte, Brazil, June
22-24,
1992, Vol.2, pp. 1-26.
- N. Ida, "3D eddy current computation",
Proceedings
of the 13th IMACS'91World Congress on Computation and Applied
Mathematics,
Dublin, Ireland, July22-26, 1990, pp. 1628-1629.
- J.S. Wang and N. Ida, "A 3-D FEM-BEM model
for
electromagnetic wavesinteraction with materials", in Review of Progress
in
Quantitative NondestructiveEvaluation, D. O. Thompson and D. E.
Chimenti,
Eds., Plenum Press, New York,1990, Vol. 9A, pp. 311-318.
- M.E. Lee and N. Ida, "A Transient
Axisymmetric
Formulation for Modelingof Composite Materials", in Review of Progress
in
Quantitative NondestructiveEvaluation, D. O. Thompson and D. E.
Chimenti,
Eds., Plenum Press, New York,1990, Vol. 9A, pp. 295-302.
- N. Ida, "Computation of resonant
frequenciesfor
nonuniformly loadedcavities using a modified 3D eddy current
formulation",
in Proceedings ofthe European TEAM Workshop and International Seminar
onElectromagnetic
FieldAnalysis, Y. Krutzen, N.J. Diserens, C.R.I. Emson andD. Rodger,
(eds.),
1990,pp.267-274.
- P. Subramaniam and N. Ida, "A
parallel
algorithm
forfinite elementcomputation", in Proceedings of the 2nd Symposium
on
the
Frontiers of MassivelyParallel Computation, (October 10-12, 1988,
Fairfax,
VA), IEEE Computer SocietyPress, (CH2649-2), Washington DC, 1989, pp.
219-222.
- J.S. Wang and N. Ida, "Parallel
algorithms
for
direct solution of large systemsof equations", in Proceedings of
the
2ndSymposium
on the Frontiers of MassivelyParallel Computation, (October 10-12,1988,
Fairfax,
VA), IEEE Computer SocietyPress, (CH2649-2), Washington DC,1989, pp.
231-234.
- N. Ida, "Computation of fields in
electromagnetic
nondestructive testing",in Finite Element Analysis in Fluids,
(Proceedings
of the Seventh InternationalConference on Finite Element Methods in
FlowProblems,
Huntsville, Alabama,April 3-7, 1989.) T. J. Chung and G. R. Karr,Eds.,
UAH
Press, 1989, pp.487-492.
- J.S. Wang, N. Ida and S. I. Hariharan,
"Numerical
modeling of transientwave propagation for high frequency NDT", in
Reviewof
Progress in QuantitativeNondestructive Evaluation, D. O. Thompson andD.
E.
Chimenti, Eds., PlenumPress, New York, 1989, Vol. 8A, pp. 259-266.
- N. Ida, "Theoretical aspects of the remote
field
effect", Proceedingsof the 3rd National Seminar on Non-Destructive
Evaluation
of FerromagneticMaterials, Houston, Tx., March 1988, pp. 53-57.
- N. Ida, "3-D shielding effects for MRI
magnets",
in ElectromagneticFields in Electrical Engineering, D. Shunnian, Ed.,
International
AcademicPublishers, Oxford, Proceedings of the Beijing International
Symposiumon
onElectromagnetic Fields in Electrical Engineering, Beijing, China,
October
19-21, 1988, pp. 668-671.
- N. Ida, S. I. Hariharan, J. S. Wang
and
M. E.Lee, "Computationof high frequency electromagnetic fields", in
Electromagnetic
Fields in ElectricalEngineering, D. Shunnian, Ed., International
Academic
Publishers, Oxford,Proceedings of the Beijing International Symposium
onElectromagnetic
Fieldsin Electrical Engineering, Beijing, China, October19-21,1988, pp.
600-603.
- M. J. Braun, N. Ida, C. Batur, B. Rose, R.
C.
Hendricks and R. L.Mullen"ANon-InvasiveLaser Based Method for Flow
Visualization
and Evaluationin Bearings",In Tribology- Friction, Lubrication and
Wear,Proceedings
ofthe InternationalConferenceon Tribology, Friction,
LubricationandWear,July
1-3, 1987, London(UK),Vol. 1, 1987, pp. 37-46.
- M. V. Koroly, N. Ida and L. E. Roemer, "An
electromagnetic
actuatorusing recently developed Rare Earth Permanent Magnets",
presented
at the VI WorldCongress of the International Society for Artificial
Organs,
Munich, Germany,September 6-9, 1987.
- N. Ida and L.E. Roemer, "The use of eddy
current
testing in rubber belting evaluation",in IEEE Conference Record of the
39th
Annual Conferenceon ElectricalEngineeringProblems in the Rubber and
Plastics
Industries, Akron, Ohio, April6-7, 1987,pp. 9-13.
- N. Ida and L.E. Roemer, "Eddy
Current Detection
and Evaluationof Steel Wires," presented at the 1987 ASNT
FallConference,
Atlanta, GA.,October 7-9, 1987. (No Proceedings).
- N. Ida, "Three Dimensional Eddy Current
Modeling,"
Review of Progressin Quantitative Nondestructive Evaluation, D. O.
Thompson
and D. E. Chimenti,Eds., Plenum Press, New York, Nov. 1987, Vol. 6A,
pp.201-209.
- M. J. Braun, C. Batur, N, Ida, B. Rose, R.
C.
Hendricks and R. L.Mullen,"ANon-Invasive, Laser Based Flow Analysis for
Thin
Film Flows atLow Reynolds Numbers,"Proceedings of the ASME/JSME Heat
Transfer
Conference,Hawaii, March 1987,Vol. 2, 1987, pp. 71-78.
- N. Ida and R. Ludwig, "Performance of
largescale
finite element eddycurrent and ultrasonic models on a vector
computer,"in
Review of Progressin Quantitative Non destructive Evaluation, D. O.
Thompson
and D. E. Chimenti,Eds., Vol. 5A, Plenum Press, N. Y., 1986, pp.
157-164.
- N. Ida, "Velocity effects in eddy
current
problems", in Proceedingsof the Fourth Eddy Current Seminar, Rutherford
Appleton
Laboratory, RAL-86-088,March 24-26, 1986, pp. 189-202.
- N. Ida, "Some special aspects and
limitations
of 3-D finite elementmodeling," Proceedings of the Second National
Seminar
in Non-Destructive Evaluation ofFerromagnetic Materials, Houston, Tx.,
March
19-20, 1986.
- N. Ida, "A mesh generator with automatic
bandwidth
reduction for 2-Dand 3-D geometries," In Computational
Electromagnetics,Z.
Cendes, Ed., ElsevierScience Publishers, 1986, pp. 13-22.
- N. Ida, "An integrated electromagnetic
finite
element package for personalcomputers," Proceedings of the Second
National
Seminar in Non-DestructiveEvaluationof Ferromagnetic Materials,
Houston,Tx.,
March19-20, 1986.
- C. Shaver and N. Ida, "A PC based
preprocessor
for finite elementanalysis,"inProceedings of the 17th Pittsburgh
Conference
on Modeling and Simulation, Pittsburgh,April 24-25, 1986, Vol. 17, Part
3,
pp. 927-931.
- N. Ida, "Modeling of Velocity Effects for
Low
Frequency Eddy CurrentTesting," Proceedings of the Second National
Seminar
on Non-Destructive Evaluationof Ferromagnetic Materials, Houston, Tx.
March
19-20, 1986.
- N. Ida and K. Udawatta, "Solution of
LinearSystems
of Equations onthe Massively Parallel Processor," Proceedings ofthe
First
Symposium on the Frontiersof Massively Parallel Scientific
Computation,NASA/Goddard
Space Flight Center,September 24-25, NASA CP-2478, 1986, pp.249-253.
- N. Ida, "Factors in three-dimensional
modeling
of leakage fields,"Proceedings of the First National Seminar on
Nondestructive
Inspection of FerromagneticMaterials, Houston, Texas, March 28-29, 1984.
- N. Ida, "Vector computing in 3-D eddy
current
calculations,"Proceedingsof the Third Eddy Current Seminar, Rutherford
Appleton
Laboratory, Abingdon,United Kingdom, April 2-4, 1984, pp. 41-56.
- S. Heath, N. Ida, S. R. Satish and L.
Srinivasan,
"Residual and activemagnetic field modeling," Presented at the
QualTest-2
Conference, October25-27, 1983, Dallas, Texas. (Abstract in Materials
Evaluation,
Sept. 1983,p. p/25).
- W. Lord and N. Ida, "Developments
in the
numerical
modeling of steamgenerator EC NDT phenomena," NDE in the Nuclear
Industry,
H. Wadley, Ed., ASM,Metals Park, Oh., 1984, pp. The 6th International
ASM
Conferenceof Quantitative Nondestructive Evaluation in the Nuclear
Industry,
28 Nov.-2 Dec., 1983, Zurich, Switzerland, pp. 489-493.
- R. Palanisamy, N. Ida and W. Lord,
"Developments
in the finite element modeling of eddy current NDT phenomena at
Colorado
StateUniversity," in Review of Progress in Quantitative Non
destructive
Evaluation,
D. O. Thompson and D.E. Chimenti, Eds., Plenum Press, New York, 1982,
Vol.
1, pp. 357-361.
- N. Ida and W. Lord, "GIGO - A study of
mesh
structurefor eddy current problems," proceedings of the 5th
COMPUMAGConference,
June 3-6, 1985, pp 495-498.
Back to Main Page